The high performance luminaire is designed for full cutoff applications where long life, low maintenance, and consistent color rendering are required. Areas with limited accessibility due to fixture location or where heavy pedestrian traffic makes maintenance difficult are ideal applications such as building facade lighting or wall mounted security lighting. The contemporary design style of the luminaire allows it to be seamlessly integrated into existing systems when necessary.

The heavy duty housing is constructed of die cast aluminum. The optical assemblies are sealed in place using a silicone gasket for weather tight protection. IP Rating†: IP66 (when specified and ordered without housing‑penetrating options).

A Super Durable Polyester E-coat powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.

Made with a state of the art UV stabilized acrylic high performance refractive optical assemblies that use high transmittance materials to achieve precise photometric distributions. Available in Type II, III, and IV beam configurations. Star Light Friendly (meets or exceeds Dark Sky requirements) in the horizontal position. *Optional shielding accessories are available to further reduce back light or high-angle side light in sensitive wall-mounted applications.

Available in a high output LED system in 5000K Cool White (+/- 500K) , 4000K Neutral White or 3000K Warm White color. Available with 90-300V 50/60 Hz Class II power supply. LED’s rated for over 100,000 hours at 55°C ambient temperature. Available with 120~277V 50/60 Hz power supply. 480V and 277V input option. Built-in surge protection up to 6 kV. Built-in Active PFC Function LED driver conforms to UL8750 standards.

Quick mount bracket connects to a standard J-Box. The bracket has a unique hanging feature to allow easy wire connections. After connections are made, the fixture swings down and is secured with two retaining screws at the bottom of the fixture.

†Fixtures ordered with the following options are not IP66 rated: IMS, IMSBTM, PC3, P1000PC, photocells, motion sensor options, emergency battery options (except HOEB), or other options that penetrate the housing. Fixtures ordered with photocell or motion sensor options result in an IP65 rating. The IP66 rating is maintained when the fixture is ordered with SCE (Side Conduit Entry), BDS8 (bird‑deterrent spikes), or HOEB options, provided no sensor, control, or non‑HOEB battery options listed above are included.

LED Driver listed for wet locations. LED bricks ETL listed for wet locations. Meets US and Canadian safety standards. -40°C to 50°C ambient operation.